Traffic Shaping [main menu]
Enable Traffic Shaping Specifies the startup of the traffic shaping and QoS system.
Apply Traffic Shaping on Devices Specify which interface you would like shaping services to run on.
Maximum Wired Device Bandwidth

This is used to set the maximum interface bandwidth on the wired interface. Default is 100 mb/s. May not work on all systems such as WRAP boards.

Maximum Wireless Device Bandwidth This is used to set the maximum interface bandwidth on the wireless interface.  Default is 10 mb/s
Class Name

This is not used for anything in the system and can be changed to anything desired. It is only used for the users reference to determine each class of traffic.

Owner is class 1 traffic
Member is class 2 traffic
Public is class 3 traffic
Unknown is class 4 traffic
SIP is class 7 traffic

Priority You can rearrange the QoS of priority used in the packet transmission sequence. The shaping system uses a round robin system based on a traffic classes. The prio setting lets the user specify the order in which to transmit packets. 0 is the highest priortiy and can be as large as you want, but there are only 5 classes of traffic.
Download Bandwidth Specify the maximum speed a client should recieve packets coming from the gateway to the node.
Upload Bandwidth Specify the maximum speed a client should recieve packets leaving the node for the gateway.

Back to Top ++